By buying this product you can collect up to 28 Citimarine points. Your cart will total 28 points that will be converted into a voucher of $2.80 towards your next purchase! Must be logged in to collect points.
MARCH PUMPS AC-3CP-MD (600 GPH) 115V Mag-Drive Centrifugal Pump
March Pump- Mag-Drive Centrifugal Pump, Polypropylene Plastic Pump Head, and Impeller, 115V 60Hz Air Cooled Motor, Up To 10 GPM, 3/4" FPT Inlet, 1/2" MPT Outlet, 3 Foot Power Cord with No Plug.
MFG#: 0130-0018-0100
March AC-3CP-MD 115V Mag-Drive Centrifugal Pump (600 GPH)
March Pump's industrial AC-3CP-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 10 gallons per minute at 1 feet, and its maximum head is 20.5 Feet (or around 9PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Ceramic, and Ceramic Magnet. The inlet connection is 3/4 inch female pipe thread, and the outlet is 1/2 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.6 Horsepower fan cooled motor, which can be run on 60 hertz on 115V or 50 and 60 hertz on 230V (there are performance differences between the hertz options).
OERATION
Pumps are not self-priming, lack a suction lift, and thus require a flooded suction. Pumps cannot be run dry because the impeller requires the liquid being pumped for lubrication. For liquids with a specific gravity greater than water, have a higher viscosity, or for elevated temperatures, a trimmed impeller may be necessary. For application assistance, contact March Pump.
ELECTRICAL
Motors are available in different electrical configurations such as 115 Volt 60 Hz, 115 Volt 50/60 Hz, or 230 Volt 50/60 Hz, 1 phase. The motors are U.L. listed and rated as continuous duty.
LIMITED WARRANTY
March pumps are guaranteed only against defects in workmanship or materials for a period of one year from date of manufacture pumping water. For the complete warranty and to register online go to www.marchpump.com/warranty-registration Model
Specifications
Inlet: 3/4" FPT / Outlet: 1/2" MPT
Max Internal Pressure: 50 psi (344 kPa)
Max Liquid Temperature: 190 °F (87 °C)
Dimensions (inches): 3.91 x 5.00 x 8.12
Packed Weight (lbs): 8.55