By buying this product you can collect up to 68 Citimarine points. Your cart will total 68 points that will be converted into a voucher of $6.80 towards your next purchase! Must be logged in to collect points.
OBERDORFER 305M-08 Flexible Impeller Pump Head With Bracket
Oberdorfer - 305M-08 Flexible Impeller Pump. Pipe Size 3/4" - 8 GPM @ 2 psi - Mechanical Seal Type - 6 lbs Weight. All bronze construction. Ideal for marine service. Nitrile O-ring seal between body and cover eliminates gasket problems. Stailess Steel Shaft. Reversible wear plate.
Part Number: OB 305M-08
Free US Shipping.
Discontinued, contact us for a replacement
Oberdorfer - 305M-08 Flexible Impeller Pump - 8 GPM @ 2 psi- 6 lbs weight - Mechanical Seal Type
These Flexible Impeller pumps are made of high quality bronze of maximum corrosion resistance. All shafts consist of stainless steel grade 303. Top of the line models have ball bearings and mechanical seals while others have bronze or carbon bearings and lip type seals. Impellers are made of Neoprene Rubber. Nitrile impellers are available as an option. Flexible blades on the periphery of the impeller provide the pumping action. While the impeller rotates the liquid between the blades is continuously squeezed out into the discharge port by a machined in cam located inside the pump chamber. Pump will operate when mounted in any position.
Features
- Bronze construction - Corrosion resistant
- Reversible wear plate
- Nitrile mechanical seal
- Portable
- Slotted motor base
- Neoprene Impeller STD (Nitrile optional 305M-02)
- Stainless Steel Shaft
- Nitrile O-ring seal between body and cover eliminates gasket problems
- Impeller and cam easily replaced
- Available with AC or DC motors
Liquids and Temperatures
Liquids compatible with neoprene can be pumped including fresh and salt water solutions and mild chemicals. Do not pump severe solvents or acids. When possible flush pump with fresh water after each use.
Extremes of cold and heat will affect impeller life. Limits of 40°F to 180°F should be observed. Do not allow liquid in pump to freeze. Drain pump by loosening cover screws. Use methyl alcohol based anti-freeze compounds such as Zerex, Shell Zone, Pyro Permagard, or Dowgard.
Drive
The pump is driven directly from the electric motor shaft. An aluminum adapter connects the pump to the motor. Reversing supply leads to motor terminals reverses motor rotation. “In” and “Out” pump ports are also reversed.
Suction Lift
Suction lift of 15 feet is possible when impeller is wet. Suction lines must be air tight in order for pump to self prime. A foot valve at the beginning of suction line is recommended.