By buying this product you can collect up to 319 Citimarine points. Your cart will total 319 points that will be converted into a voucher of $31.90 towards your next purchase! Must be logged in to collect points.
Side-Power SE60/185S-12IP DC Thruster - 12v, Single Prop 132-161 lbs of Thrust, Ignition Protected
The Side-Power SE60/185S-12IP DC Thruster is certified to ISO 8846 Ignition Protected standards, ensuring safety. Its waterproof design features stainless cable seals and a rugged plastic housing. With thrust ratings of 132 lbs (60 kg) at 10.5VDC and 161 lbs (73 kg) at 12VDC, it's suitable for boats sized 29-38' (9-12 m).
Click here for details
Side-Power SE60/185S-12IP DC Thruster - 12v, Single Prop 132 lbs of Thrust, Ignition Protected
The Side-Power SE60/185S-24IP DC Thruster is certified to ISO 8846 Ignition Protected standards, ensuring safety. Its waterproof design features stainless cable seals and a rugged plastic housing. With thrust ratings of 132 lbs (60 kg) at 10.5VDC and 161 lbs (73 kg) at 24VDC, it's suitable for boats sized 29-38' (9-12 m).
The thruster has a single propulsion system and requires a minimum battery capacity of 665 CCA SAE, protected by a recommended 250 Amp fuse. It comes with 3.28' (1m) main power cables and 32.8' (10m) control cable for easy installation. Minimum depth to the top of the tunnel is 3.66" (93mm), and to the center is 7.28" (185mm).
Ignition Protection
High safety standards provide reliable and safe thruster installations in more boats
Side-Power offers modified versions of their DC electric thrusters in watertight housings for use in stern and other locations that may get wet or be exposed to petrol fumes
These thrusters are fully ignition protected (ISO 8846) for use in boats with petrol engines
They have a hermetically sealed composite housing around all electric parts
This provides the ignition protection as no petrol fumes can enter and be ignited by sparks
The other advantage is that the electric parts that could be damaged by water are also covered and protected, making these thrusters the ideal choice for other stern thruster installations where it is difficult to ensure that the thruster will always remain dry
Certified to ISO 8846 Ignition Protected standards
Water Proof (not for submerged mounting)
Stainless cable seals
Manufactured, tested and delivered as a ready sealed unit, ensuring that the installer does not have to fit any other parts that can jeopardize the hermetical seal
Supplied with 1 m/3.28' main power cables and termination blocks for easy and safe installation
Supplied with 1 m/3.28' plug and go control cable
Ignition protected housing can be opened and thereby retains serviceability of components inside the enclosure
Available as SEP-IP versions with DC Speed Control
Galvanic Separation
Immersed gear leg will not have galvanic corrosion from any electrical "leaks" caused by the motor
Intelligent Power Control
- Protects the thruster from potential problems arising from high current applications and user faults
- Delay between drive directions
- Reduces solenoid lock-in - will stop the thruster in case of a locked in solenoid
Side-Power's Dual Q-Props
- Q-Props reduce noise by up to 70% and on average 5Kg more of thrust than average thruster props
- High strength composite material
Sealed and Lifetime Lubricated Gear Leg
- Lifelong mechanical seals
- Zero oil changes - ever
OverHeat Protection
- Detect when internal components become too hot.
- When an unsafe temperature is detected, the switch automatically shuts off the unit to prevent overheating.
- Single Propeller
- Low Noise
- Low Maintenance
- Can be mounted bow or stern
Ignition Protected Features
- Certified and individually tested to ISO 8846 Ignition Protected standards
- Waterproof (not recommended for fully submerged mounting)
- Stainless cable seals
- Secondary overheat switch secures general temperature in housing
- Rugged plastic housing in VO self-extinguishing material
- Supplied with 3.28' (1m) main power cables and bulkhead mount terminals for easy and safe power supply hook-up
- Supplied with 32.8' (10m) control cable with connector for connection outside of ignition protection area
Specifications:
- Thrust @21V: 132 lbs (60 kg)
- Thrust @24V: 161 lbs (73 kg)
- Typical Boat Size: 29-38' (9-12 m)
- Tunnel Diameter (ID): 7.28" (185 mm)
- Propulsion System: Single
- Power @ 21V: 4 hp (3.1 kw)
- Voltage: 12VDC
- Minimum Battery Capacity: 332.5 CCA SAE
- Recommended Fuse Size: 150 Amp (SMANL150)
- Manufacturer: Side-Power
- Min Depth to Top of Tunnel: 3.66" (93mm)
- Min Depth to Center of Tunnel: 7.28" (185mm)